TRUCK WHEEL BEARING LOCKNUT SOCKETS
- Each of these sockets has 3/4" square drive opening, permitting the use of an extension and torque wrench to tighten the locknut as required.
- Locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.
- Sockets are made of high-strength steel; openings resist "rounding out."
- * Fits special "rounded" hex nut as found on Dana axles of some Ford trucks.
| SKU | Size | Pt |
|---|
| OTC1901 | 2-3/32" | 6 |
| OTC1902 | 2-3/8" | 6 |
| OTC1903 | 2-3/8" | 8 |
| OTC1904 | 2-9/16" | 6 |
| OTC1905 | 2-9/16" | 8 |
| OTC1906 | 3" | 6 |
| OTC1907 | 3" | 8 |
| OTC1908 | 3-1/4" | 6 |
| OTC1909 | 3-1/4" | 8 |
| OTC1910 | 3-1/2" | 6 |
| OTC1911 | 3-1/2" | 8 |
| OTC1912 | 3-7/8" | 6 |
| OTC1913 | 3-7/8" | 8 |
| OTC1914 | 4" | 6 |
| OTC1915 | 4-1/8" | 6 |
| OTC1916 | 4-3/8" | 6 |
| OTC1917 | 4-3/8" | 8 |
| OTC1918 | 4-7/8" | 6 |
| OTC1919 | 4-7/8" | 8 |
| OTC1920 | 2-1/4" | 6 |
| OTC1921 | 2-1/2" | 6 |
| OTC1922 | 2-5/8" | 6 |
| OTC1923 | 2-3/4" | 6 |
| OTC1924 | 3-3/8" | 8 |
| OTC1925 | 3-3/4" | 8 |
| OTC1926 | 3-3/4" | 6 |
| OTC1927 | 3-13/16" | 8 |
| OTC1928 | 2-9/16" | 6* |
| OTC1932 | 2-7/8" | 6 |
| OTC1933 | 2-7/8" | 8 |
| OTC1934 | 3-1/8" | 6 |
| OTC1935 | 3-1/8" | 8 |
| OTC1936 | 2-3/8" | 6* |
| OTC1937 | 2-3/4" | 8 |
| OTC1938 | 4-1/2" | 8 |
| OTC1939 | 5-1/4" | 6 |
| OTC1940 | 4-1/8" | 8 |
| OTC1941 | 4-13/16" | 8 |
| OTC1950M | 54mm | 6 |
| OTC1951M | 55mm | 6 |
| OTC1952M | 60mm | 6 |
| OTC1953M | 70mm | 6 |
| OTC1954M | 71mm | 6 |
| OTC1955M | 80mm | 6 |
| OTC1956M | 82mm | 8 |
| OTC1957M | 90mm | 8 |
| OTC1958M | 94mm | 8 |
| OTC1959M | 106mm | 8 |
| OTC1960M | 110mm | 8 |
| OTC1961M | 120mm | 8 |
| OTC1962M | 100mm | 8 |
All descriptions and specifications subject to change without notice. Items may not be exactly as illustrated.